Kanchan Instruments

BOD Incubator +10°C to 65°C-Inner-SS-304grade-Outer-MS Powder coated. Chamber Design Double walled Inner Chamber Inner chamber made of stainless steel 304 Grade Outer Chamber Outer chamber made of mild steel and finished with powder coated. Insulation Insulation between inner and outer chamber is filled with high grade glass wool with a gap of 65mm thickness, to withstand maximum Temperature 60° C Wheels The unit is mounted on a sturdy steel frame with caster wheels for easy movements to higher capacity 6,10,12CFT only. Conditioning system Air Circulation Fan Motor The triple walled back of the instrument is provided with air circulation fans. The chamber is equipped with a vertical recirculating conditioning stream of air sucking from the top of the inner chamber and allows passing through the back side of the inner chamber duct and carrying heating/cooling/humidity which enters from the bottom of the chamber this process continuous to maintain uniformity throughout the chamber. Cooling An energy efficient cooling unit is installed in our instrument hermetically sealed compressors. These compressors are the heavy duty industrial type noise free, vibration free and air cooled Compressors start in sequence to protect the unit from overloading. We use CFC free environmentally friendly refrigerant and compressors of Kirloskar/Tecumseh make, conforming to latest international standards and guidelines Inner Glass Door Inner full- length glass door is provided to view the samples without disturbing the temperature Outer Door Inner stainless steel and Outer made of Mild steel finished with powder coated Gasket Rubber gasket and latch is provided for the door is provided for the door to avoid air leakage and temperature loss from Instrument. Trays Two/ Three perforated removable stainless steel trays at the fixed distance. Temperature Range 10°C to 60°C Temperature Controller Microprocessor based PID temperature controller with dual display (Process value and set value), low and high limit setting with PT-100 Sensor Temperature Resolution 0.1°C Temperature Accuracy ± 2°C. Temperature Uniformity ± 3°C. Power Supply 230 Volts Single Phase 50Hz, AC supply. Inner viewing Light Door switch with viewing light will be provided [optional] at an extra cost Chamber Illumination Cyclic Timer with florescent tube / LED light will be provided on either side of the inner Chamber [ optional ] at an extra cost.