Kanchan Instruments

Chamber Design

Triple Walled, ducted air type Three chamber body.

Inner Chamber

Inner and Inner most chamber made of stainless steel 304 Grade

Outer Chamber

Outer chamber made of mild steel and finished with powder coated.

Insulation

Insulation between inner and outer chamber is filled with high grade Ceramic Fibre and glass wool with a gap of 100mm thickness, to withstand maximum

Temperature 300° C

Air Circulation Fan Motor

The motorized forced air circulation is provided at the Top to maintain uniform temperature inside the chamber

Heaters

Air Heaters are made of high grade Kanthal wires of suitable wattage.

Gasket

An Silicon gasket is provided for the door to avoid air leakage and temperature loss from Instrument.

Trays

Perforated removable stainless steel trays at the fixed distance.

Temperature Range

5 °C above ambient to 300°C.

Temperature Controller

Microprocessor based PID temperature controller with dual display (Process value and set value), low and high limit setting with PT-100 Sensor

Thyrister Controller

(Optional If Required)

For replacement of temperature controller to get better accuracy of temperature from minimum to maximum specified temperature range given and to avoid over

soot at lower temperature is done by thyristerised temperature controller with Thyristerised Pack. At on extra cost of Rs.9,800.00 + GST 18% EXTRA

Temperature Resolution

0.1°C

Temperature Accuracy

± 1°C.

Temperature Uniformity

± 3°C.

Power Supply

230 Volts Single Phase, 50Hz, AC supply.